Invisible protection, waterproofing, sealing easy to clean for deckwooden surfaces
Our commitment in action
Invisible protection, waterproofing, sealing, easy to clean for deckwooden surfaces
Nano4-Deckwooden® is a water based Nanotechnology product and it is completely environmentally friendly.
After applying the product and upon completion of the curing process (24 hours), a thin layer of SiO2 (silicon Dioxide) seals the protected area.
Nano4-Deckwooden® create an invisible protection against any dirt particles and from sea salt, sunlight, moisture, moss, grasses.
Surfaces coated with Nano4-Deckwooden® are also highly resistant to stress and does not contain silicone or other harmful chemicals.
Nano4-Deckwooden® does not change the look, feel or breathability of the surface.
Nano4-Deckwooden® Can be used as a substitute of water in waterborn paints.
Nano4-Deckwooden® is certified: (Click here in order to see all of our certifications)
a)According to din ISO11507, (Artificial weathering with fluorescent UV lamps according to method A for different coatings on sandstone) by Polymer Service GmbH Institute.
b) According to din EN 12390 8 2009 (concrete depth of penetration of water under pressure) by A.P.E.B.
c)According to din EN 110545-14:1998 (determination of resistance to stains) by Tecnalia Institute Spain Nano4-Stone® also increases the durability of the materials applied with our product.
On which surfaces can be applied:
Wooden garden furniture.
Wooden roofs and trusses.
Wooden surfaces with no chemical paints.
Increased durability of of wooden surface.
Stops dirt and water soaking into the surface
Invisible and permanent protection of the surface texture
Prevents weathering damage.
It not allows the salt to enter inside the wooden porous
Resistant against high pressure cleaning (up to 60 Bar)
Heat resistant (up to 450°C)
High Hydro αnd Oleo phobia
Easy to apply
Free of solvent and neutral in odour
Store able right after αpplication
No additional energy or UV-light necessary.
Hardening at room temperature.
Permanent protection of the surface texture of algae,fungi,molds, blackness
Before using the product clean the surface very well with traditional methods and rinse with water.
For the best results surfaces should be sprayed at least twice (wet to wet , it is very important to spray the second hand before the first has dried ), depending on the absorbency of the surface you want protected. The process may need to be repeated.
For economic use, you can use an HVLP spray gun.
Other application techniques:
In addition to spraying, you may protect the surface with Nano4-Deckwooden® using a brush, dipping or a paint roller. Results may vary depending on the application method.
After coating with Nano4-Deckwooden® the surface takes 24 to 48 hours (at 20ºC) to be fully cured. The time required for curing may vary depending on ambient temperatures.
For more and analytic installation instructions please click here (INSTALLATION INSTRUCTIONS) to read our interactive book or to Download the PDF file.
Duration of the protection:
Protection products reaches up to 8 years, provided that the placement of Nano4-Stone made in accordance with the instructions.
The amount of product needed each time depends on the method of application and the porous of the surface. In any case the consumption will be between 30ml/m2 and 200ml/m2. This means that 1 liter can cover the surface of 5m2 to 33m2. We recommend to test each type of surface first to determine the absorption of the surface. An easy test to calculate the absorption of the surface is to wet 1m2 of the surface by using normal water. By this way you can see what is the exactly consumption for each surface.
Quality ISO 9001:2008
NANO4LIFE EUROPE L.P.® is an ISO9001:2015 certified company in the production of Nanotechnology products.
During the development and production process, we invest a great deal of time and effort in determining the Life Cycle Assessment (LCA) of selected products. LCA is the global standard for assessing the total environmental impact of a product taking into account all environmental aspects , including resource and energy consumption, emissions to air, water and soil, as well as the impact on health and ecosystems. LCA is widely used by industry, governments and non-governmental organisations. We make these studies available to our customers after their completion in the belief that transparency creates sustainability and trust.
Product safety is considered paramount in our company. Diverse internal measures and company standards, which regularly go beyond the legal and customer requirements, ensure the quality and safety of our products.
We also work closely with renowned independent inspection authorities, institutes and laboratories to ensure maximum product safety.
We want to be sure that the customer will buy a genuine and functional product. That is why all of our products are sealed with thermoplastic protection.
Do not buy a product if
(a) it is not sealed with thermoplastic protection
b) If you find that the expiry date of the product is earlier than the purchase date.
Thermoplastic bottle sealing
- All ΝΑΝΟ4LIFE® products are in stock and can be delivered within 24 hours to any destination in the world. Delivery in European Countries can be provided within 1 day and other points in the world in approximately 3 days with very low transportation costs.
- Available packs is : 100ml, 200ml, 500ml, 1Liter, 4Liters, 20Liters, 200Liters, 1000Liters.
If you want to see a video with the product functions please click the video icon on the left.
If you want to read and download the product broshure in an interactive PDF file please click here
If you want to order the product via our e-shop please click to the e-shop button on the left.