Coronavirus|Spray your surfaces and kill 99,99% all virus for 3 years protection

Spray all surfaces and kill 99.99% of virus permanently for 3 years. Protect your life and your family.

Click here and see  product certifications for effectiveness



A permanent for 3 years wear resistant coating

for protection against microbial attacks 


Every day we receive thousands of emails from around the world with the same question. Does your product kill COVID-19?

ANSWER. The product NANO-HYGIENE LIFE was designed and manufactured 2 years before COVID-19 was created. Before the product was released on the market we did a lot of tests on bacteria and viruses that existed at that time. Tests have shown that NANO-HYGIENE LIFE kills 99.999% of known bacteria and viruses. Our scientific team believes that NANO-HYGIENE LIFE theoretically kills COVID-19 when it touches a protected surface. Because so far we have no certified tests and wanting to protect our customers and the prestige of our company we cannot claim that this is true. We hope to receive the appropriate certification about this very soon.

Protects what matters most

NANO4-HYGIENE LIFE is a product that provides full anti-bacterial protection for hospitals, schools, public transport, homes and every place where bacterial deposit through human tactile contact is possible.

Studies on sanitisation show that bacteria can survive for more than 30 days on walls, surfaces and medical supplies. It has also been confirmed that all common commercial disinfectants fail to fully eliminate pathogens. Their short-term effect is followed by the reappearance of bacteria in just a few hours, and so the disinfected surfaces have to be resanitised. In contrast, NANO4-HYGIENE LIFE provides lasting anti-bacterial protection for three years.

Hospital-acquired infections constitute a serious public health hazard, which derives from highly resistant bacteria.

Testing different sanitisation processes against a single germ has shown that some cells of the pathogen resist elimination.

 For all the above reasons, the use of NANO4-HYGIENE LIFE is imperative, as a guaranteed method of anti-bacterial protection for all sorts of surfaces.

To tackle this problem, NANO4LIFE EUROPE L.P. has introduced NANO4-HYGIENE LIFE since 2019, a product that instantly eliminates the 99,999% of viruses, bacteria, fungi, odour etc. Certified tests prove the truth of our words. Please, click here to check all certificates.

NANO4-HYGIENE LIFE is the best non-toxic, eco-friendly alternative to all available commercial disinfectants with harmful effect.

How it works:

The technology behind NANO4-HYGIENENLIFE®  provides an immediately microbial kill and in comparison to other convenient products NANO4-HYGIENENLIFE®  is non-mutagenic and safe-to use as no halogens or SVHC are present.  Please click here  and read carefully all the test reports regarding the results which confirm that the NANO4-HYGIENE LIFE kills the 99,99% of the bacteria and virus.

Once NANO4-HYGIENENLIFE® is applied on the surface, a layer of “swords” is present. Due to the positively charge of the “swords” the negatively charged membrane of the microorganisms is attracted and once it gets in contact with the “sword” the cells will be punctured what leads to cell dead. Thus, NANO4-HYGIENENLIFE®  does not kill the cells by interfering with the metabolism (the product is not absorbed by the cells and works from the inside), it is a physical effect by which the cells are immediately killed once they touched the surface.


Based on the conditions that were set (following the standard which was used to perform the testing) about 10^5 cells were used. After 24 h 99,999 % were killed. Since a high amount of cells was used, it takes some time until every cell reaches the surface (since they might be cells on top of other cells).


Looking at those results, we always get questions like “Why does it take 24 h until all cells are killed?” or “Is there no option that the effect will be faster”. The reason why it takes 24 h to kill all cells is based on the high amount of cells that are present. As already mentioned, if a high concentration of cells is present, it takes some time until very single cell touches the surface. This means, if less cells are present, the effect (kill rate of 99,999 %) will be faster. The reason why this high load of cells was used is based on the fact that we have to follow the conditions of the standard to gain standardized results. Nonetheless, to prove, that the theory of “the more cells are present, the slower the effect” is right, we performed a testing with adjusted cell conditions – conditions that mirror real-life.

Key performance characteristics at a glance:

  • Safe anti-bacterial functionality – presence can be verified using a marker 

  • Prevents microbial odors 

  • Permanent fungicidal function 

  • Deprives house dust mites of food

  • Prevents mold growth on smooth and textured surfaces

  • Prevents micro scratches & reduces damage by improving the friction coefficient

  • Facilitates cleaning and removal of limescale, soot, grease, dust etc.

  • Promotes comfort, well-being and safety

  • Free from halogens (especially fluorine, PBT/vPvB- & SVHC-substances)


  • NANO4-HYGIENE LIFE® reduces surface energy. NANO4-HYGIENELIFE® technology facilitates the removal of dirt and biological deposits as well as soap residues and inorganic dirt.

  • By forming an ultra-thin layer of glass, NANO4-HYGIENELIFE® protects, among other things, against micro-scratches 9H. Under mechanical abrasion, the protective layer is abraded before the substrate is damaged. A unique GLIDE function, ensures that any abrasive contact materials glide over the treated surface and leave fewer traces.

  • Protected surfaces take on a measurably higher degree of hardness (3 levels of pencil hardness).

  • The surface is first cleaned and polymerized (step 1).

  • Subsequently, the modified silica delivers a safe and permanent antimicrobial function (step 2). 

  • A non-migrating antimicrobial glass layer is created.

  • NANO4-HYGIENELIFE® is suitable for all glossy surfaces*

To meet the highest demands of test standards in the  supply chain, color coding confirms

the antimicrobial agents level of performance.

On what surfaces it can be applied:

  • Glass ​

  • Ceramics

  • Porcelain

  • Noble metals (aluminum, stainless steel, brass, gold)

  • Plastics, made from e.g. PMMA, ABS, ECTFE, HDPE, LDPE, PA, PC, PMP, PP, PS,PVC, SAN or SI

  • Varnishes

  • Printed cardboard and wrapping

  • Phones, LCD, AMOLED

  • Toilets 

  • Water dispensers

  • Steering wheel

  • Medicine tools

  •  Nursing facilities

  • Door knobs

  • Slot machines

  • Handrails

  • Elevators e.t.c.

CANNOT be used on these surfaces:


  • Water-sensitive surfaces, such as paper,textile,stone,wood e.t.c.. 

If you’re unsure whether our products are suitable for any surface, please do not use it.


Product Qualities:

  • Invisible hygiene- and abrasion protection against micro scratches on glass or plastic displays, LED, LCD or AMOLED. Zero limitation  to touch functions or usability; as holds true for cases or covers of smartphones

  • Easy-to-clean and hygiene-treatment for bathroom ceramics, toilet lids, sanitary surfaces and bathroom utensils (i.e. taps, shower heads and hoses)

  • Protection against infections on plastics, stainless steel or varnished surfaces in public toilets, hotels, public transportation and food service industry.

  • Permanent surface disinfection in hospitals, caring and nursing facilities, especially those within intensive and quarantine care, or surfaces with a high infection risk (e.g. door knobs) including shelf spaces, work-tops and floors (please check national regulations!)

  • Permanent hygiene for phones, keyboards and other input devices which are regularly touched and used

  • Stainless steel handrails and elevators (incl. operating devices)

  • Wear and tear and hygiene treatment for automatic vending equipment, slot machines, water dispensers, parking meters, and other publicly used machines.

  • Easy-to-clean anti-limescale performance for glass, PMMA or textile shower screens.

  • Odor free hygiene performance for waste bins

  • Hygiene performance in ventilating systems

  • Permanent hygiene protection for flooring and other surfaces

  • Mold reduction for agricultural covers


Proven efficiency of the agents

Scientific studies and publications proved the efficiency of the silicon-functionalized ammonium compounds for the following microorganisms:



  • Adenovirus Type II & IV

  • Bovine Adenovirus Type I & IV

  • Feline pneumonitis

  • Herpes Simplex Type I

  • Herpes Simplex Type II

  • HIV-1 (AIDS)

  • Influenza A2 (Aichi)

  • Influenza A2(Asian)

  • Influenza 

  • Mumps

  • Parinfluenza (Sendai)

  • Rous Sarcoma

  • Reovirus Type I

  • Simian Virus

  • Vaccinia

  • MS2 9

  • PRD1

​Gram-negative microorganisms

  • Acinetobacter calcoaceticus

  • Aeromonas hydrophilia

  • Citrobacter deversus

  • Citrobacter freundi

  • Enterobacter aerogenes

  • Enterobacter aglomerans

  • Enterobacter cloacae

  • Enterococcus

  • Escherichia coli

  • Klebsiella oxytoca

  • Klebsiella pneumoniae

  • Klebsiella terriena

  • Legionella pneumophila

  • Morganella morganii

  • Proteus mirabilis

  • Proteus vulgaris

  • Pseudomonas  aeruginosa

  • Pseudomonas fluoscens

  • Salmonella cholera suis

  • Salmonella typhi

  • Salmonella typhimurium

  • Serratia liquifaciens

   Fungi, Algae, Mold

  • Alterania alternate

  • Aphanizomenon sp.

  • Aspergillus flavu

  • Aspergillus niger

  • Aspergillus sydowi

  • Aspergillus terreus

  • Aspergillus versicolor

  • Aspergillus verrucaria

  • Aureobasidium pullans

  • Candida albicans

  • Candida  pseudotropocalis

  • Chaetomium globsum

  • Cladosporium cladosporioides

  • Chlorella vulgaris

  • Dreschslera australiensis

  • Epidermophyton sp.

  • Gliomastix cerealis

  • Gloeophyllum trabeum

  • Microsporum sp.

  • Microsporum audouinii

  • Monilia grisea

  • Oscillatoria

  • Penicillium chrysogenum

Application method:


1. Before using the product, clean the glossy surface thoroughly and rinse with water and dry.


2. Wear a pair of plastic gloves, by using a clean cloth, spray with the cleaning and polymerizing NANO4-CLEAN&PRIMER® on the surface and wipe it well to remove any chemical residue and polymerize the surface for the antibacterial coating.


3. After approx. 5 min, spray on the polymerized surface with the NANO4-HYGIENE LIFE® and wipe it well activated and becomes antimicrobial, wipe until all visible streaks disappear. A thorough polishing will be necessary, especially on transparent or shiny surfaces. After 6 hours the coating is hardened and ready for use.

The treatment of the targeted surface should be carried out under ambient conditions. Use only on room tempered surfaces (between 10º C and 40º C).

Duration of Protection:

Protection products reaches up to 3 years, provided that the placement of Nano4-HygieneLife made in accordance with the instructions. 


Onset of effect: Antimicrobial effect becomes active one hour after application.

Drying time/curing: The advised drying time from application to when contact is recommended for humans or animals to the treated surface: 6 hours

Recommended date for further treatments: As soon as the blue colour marking tester no longer sticks to the coated surface 


By using a 10ml kit you can coat approx. 3m2. Dosage rate per sprayer is approximately 0.11ml/time


NANO4-HYGIENE LIFE®, for consumers offering a 3 years permanent, antibacterial

treatment of all non porous surfaces coming in a blistering kit consisting of 2 bottles.

  1. 1 bottle for cleaning and polymerizing the coated surface named  NANO4-CLEAN&PRIMER 

  2. 1  bottle activating named NANO4-HYGIENE LIFE®


  • Chemical basis:                    Modified silicon dioxide SiO2.

  • Layer thickness:                   Approximately. 300 nm

  • Water-repellent:                   Slightly hydrophobic

  • Temperature stability:          150 degree Celsius

  • Chemical stability:                Solvent-resistant

  • Weather proof:                     2000 h according to ISO 11507 A (corresponds to ca. 3-4 years)

  • Resistance (mechanical):    On glass. ceramic > 40.000 cycles according to ISO 11998  (cleaning with  water)

  • Noble metals                        > 20.000 cycles according to ISO 11998  cleaning with water) 

  • Plastics                                 > 5.000 cycles according to ISO 11998 (cleaning with water)

  • Salt water resistant:              Yes

  • Transparency:                      100%

  • Storable:                               2 years

  • Temperature sensitivity:       3°C to 40°C

Quality ISO 9001:2008


NANO4LIFE EUROPE L.P.® is an ISO9001:2015 certified company in the production of nanotechnology products. ​​​

During the development and production process, we invest a great deal of time and effort in determining the Life Cycle Assessment (LCA) of selected products. LCA is the global standard for assessing the total environmental impact of a product, considering all environmental aspects, including resource and energy consumption, emissions to air, water and soil, as well as the impact on health and ecosystems. LCA is widely used by industry, governments and non-governmental organisations. We make these studies available to our customers upon completion in the belief that transparency creates sustainability and trust.

Product safety is considered paramount in our company. Diverse internal measures and company standards, which regularly go beyond the legal and customer requirements, ensure the quality and safety of our products. We also work closely with renowned independent inspection authorities, institutes and laboratories to ensure maximum product safety.


We want to be sure that the customer will buy a genuine and functional product. 

Do not buy a product if you find that the expiry date of the product is earlier than the purchase date.


01 =date

12 =month

15 =year

06=line production

Expiry Date:

12 =month

17 =year

Be Satisfied with the informationsNo No enoughEnoughPerfectFantasticBe Satisfied with the informations

Order products

  • All ΝΑΝΟ4LIFE® products are in stock and can be delivered within 24 hours to any destination in the world.  Delivery in European Countries can be provided within 1 day. In the rest of the world delivery takes approximately 3 days with very low transportation costs.

  • Available packs are: 100ml, 200ml, 500ml, 1Liter, 4Liters, 20Liters, 200Liters, 1000Liters.

  • ​If you want to see a video with the product functions please click the video icon on the left.

  • If you want to read and download the product brochure in an interactive PDF file please click here

  • If you want to order the product via our e-shop, please click to the e-shop button on the left.

NANO4LIFE EUROPE L.P.®  - Vouliagmenis Ave. 318 - Ag. Dimitrios - 173 43 - ATHENS - GREECE

To contact your local distributor please click here

Use of data and logos:
The trademarks, logos, distinctive marks (hereinafter collectively “Trademarks”) displayed on the Site are either registered or not NANO4LIFE EUROPE Co® -branded and / or third parties. Nothing contained on the Site should not be construed as an express or implied license or right to use any form of any Trademark displayed on the Site without the written permission of NANO4LIFE EUROPE L.P.®  and other third parties that may own the Trademarks displayed on the Site. The use by users of the Trademarks displayed on the Site, or any other content thereof, except as provided herein the Terms and Conditions and strictly prohibited. For more info please click here

Nanotechnology coating solutions|Safe antibacterial functionality|Ceramic Coating  9H|protection from UV radiation|Stay dry neverwet |Selfcleaning-Easy cleaning|Prevents micro scratches|Permanent dirt resistance|Ultrahydrophobic  oleophobic coating|Carpaint Shine Product  |Metal Anticorrosion-Antioxidation|Carpaint-Antiscrach Protection|Prevents microbial odors|Furniture carpet waterproofing|Advanced Chemical (Acid) Resistance|Antigraffiti-sealing protection  

Building surfaces Protection|Permanent fungicidal function|Shoes Waterproofing Protection|Seasalt Ship Protection  

© 2008 - 2020 by  NANO4LIFE EUROPE L.P.®. All rights reserved.


Protect your bathroom with Nano4-HygieneLife®