top of page

Invisible protection, sealing, easy to clean for
Helmet and Visor surfaces

Our commitment in action


Invisible protection, sealing, easy to clean for
Helmet and Visor surfaces


All solid objects including helmet and visor surfaces have microscopic pores invisible to the human eye, where dirt can penetrate. Chemical detergents are commonly used to clean such objects, but the problem is recurrent.

Nano4-Helmet & Visor® is a nanotechnology product especially designed to protect your helmet and visor surface and is 100% environmentally friendly.

Nano4-Helmet & Visor®, with the power of nanoparticles, seals and protects the surface of your helmet and visor, so that insect, dirt and grime particles cannot penetrate it. This allows you to conveniently clean your helmet and visor with just a little water or simply a cloth.

Nano4-Helmet & Visor® protects helmets and visors from UV radiation and premature fading.

Nano4-Helmet & Visor® spares you the effort and the cost of cleaning with chemical detergents.

Nano4-Helmet & Visor® is certified: (Click here to see all of our certifications)


a) According to din ISO11507, (artificial weathering with fluorescent UV lamps according to method A for different coatings on sandstone) by Polymer Service GmbH Institute.


b) As a food safe product according to FDA overall migration analysis by Intertek Wilton Institute U.K.

Anchor 1

On what surfaces it can be applied

  • Helmet & Visor surfaces

  • Helmets

  • Sunglasses

Anchor 2

Product Qualities

  • Free of silicone, wax or oil

  • Strong chemical and mechanical resistance

  • Extremely strong coating

  • 100% invisible sealing protection

  • Surfaces are easier to clean after application

  • Resilient to friction and high temperatures

  • Frost resistant

  • Eco friendly

  • Protection against ice

  • Very easy cleaning of bird droppings 

  • Colour protection from UV radiation

  • Saves the environment and money by reducing the use of chemical detergents by up to 90%

Target Customer

  • Motorcyclists

  • Workers

  • Helmet manufacturers

  • Motor supply stores

  • Firefighters

  • Climbers

  • Hikers

  • Extreme sports stores

  • Cyclists

  • Athletes

  • Police

  • Military

Surface preparation:

  • Before using the product, clean the glossy surface thoroughly in any traditional method and rinse with water.

  • Sprinkle Nano4-Preclean® over the glass (use sparingly) and rub well the surface with a cloth until the glass is free from any chemical residues of common cleaning agents. Before the final coating, the surface must be dry, dust free, oil and grease free. CAUTION: Nano4- Preclean® is not a stain removal cleaner and should be used only on glossy surfaces.

  • For more info about Preclean please download the pdf file.

  • The treatment of the target surface should be implemented under ambient conditions. Use only on surfaces at room temperature (between 10º C and 40º C)

Industrial application:


  •  For optimal and economical application, you can use an  HVLP spray gun. 

Other application techniques:

  • Spray the surface with Nano4-Helmet&Visor® on areas 30x30cm. The liquid (use sparingly) must be rubbed on the surface with a cloth.

  • The curing process of Helmet&Visor® under ambient conditions takes a minimum of 60 minutes up to a full day. In the event of higher air humidity, longer curing time is needed.

  •  For more and analytic installation instructions please click here (APPLICATION INSTRUCTIONS) to read our interactive book or to Download the PDF file.

Application Method


Duration of Protection

Protection lasts up to 8 years, provided that Nano4-Helmet & Visor® is applied as per instructions. 


With 1 liter, you can cover up to 200m² when the product is applied by a spray gun type HVLP or approx. 100m² if applied by hand.

Quality ISO 9001:2008



NANO4LIFE EUROPE L.P.® is an ISO9001:2015 certified company in the production of Nanotechnology products. ​​​

During the development and production process, we invest a great deal of time and effort in determining the Life Cycle Assessment (LCA) of selected products. LCA is the global standard for assessing the total environmental impact of a product considering all environmental aspects, including resource and energy consumption, emissions to air, water and soil, as well as the impact on health and ecosystems. LCA is widely used by industry, governments and non-governmental organizations. We make these studies available to our customers after their completion in the belief that transparency creates sustainability and trust.

Product safety is considered paramount in our company. Diverse internal measures and company standards, which regularly go beyond the legal and customer requirements, ensure the quality and safety of our products.

We also work closely with renowned independent inspection authorities, institutes and laboratories to ensure maximum product safety.

Quality Control


We want to be sure that the customer will buy a genuine and functional product.

That is why all of our products are sealed with thermoplastic protection.

Do not buy a product if:
(a) It is not sealed with thermoplastic protection
b) If you find that the expiry date of the product is earlier than the purchase date

Order products

Be Satisfied with the informations
No No enoughEnoughPerfectFantastic
  • All ΝΑΝΟ4LIFE® products are in stock and can be delivered within 24 hours to any destination in the world.  Delivery in European Countries can be provided within 1 day. In the rest of the world delivery takes approximately 3 days with very low transportation costs.

  • Available packs are: 100ml, 200ml, 500ml, 1Liter, 4Liters, 20Liters, 200Liters, 1000Liters.

  • ​If you want to see a video with the product functions please click the video icon on the left.

  • If you want to read and download the product brochure in an interactive PDF file please click here

  • If you want to order the product via our e-shop, please click to the e-shop button on the left.

bottom of page