How Nano4-Caprotect Can Safeguard Your Car and More: Surface Protection Tips

Elton Hana
Oct 25, 2024
2 min read

Say goodbye to scratches and marks on your car, bus, truck, and more. With nano4-carprotect, you can establish an invisible shield to protect your belongings.

In this blog post, you will discover how to safeguard your car, which product to use for this purpose, how to apply it correctly and gain further insights into this product offered by our company.

Learning more about the nano4-carprotect product from NANO4LIFE.

Even solid objects like car surfaces have tiny pores that are too small to be seen by the naked eye, allowing dirt to get inside. Although chemical detergents are commonly used to clean these surfaces, the issue persists.

Nano4-Carprotect® provides an environmentally friendly solution by using nanoparticles to seal and safeguard the surface, making it impervious to external particles.

By applying Nano4-Carprotect® as a surface coating, dirt, and bacteria can be effortlessly wiped away with minimal water or a simple cloth, thereby eliminating the need for chemical detergents typically used in cleaning and helping protect the environment.

Furthermore, Nano4-Carprotect® includes UV inhibitors that shield surfaces from solar radiation and prevent premature fading.

According to din ISO11507, (Artificial weathering with fluorescent UV lamps according to method A for different coatings on sandstone) by Polymer Service GmbH Institute.
As a food-safe product According to FDA overall migration analysis by the Intertek Wilton Institute U.K.

Where can nano4-carprotect be applied on surfaces?

Below you can see the main surfaces that our product can be applied.

All exterior car surfaces
Train surfaces
Airplane surfaces
Helicopters
Snowmobiles
Buses
Trucks
Vans

Application Method.

Before applying the product, ensure the glossy surface is thoroughly cleaned using any conventional method and rinsed with water.

Apply Nano4-Preclean® sparingly on the car surface and wipe it with a cloth until all chemical residues from typical cleaning agents are removed. The surface should be dry, and free from dust, oil, and grease before the final coating. Please note: Nano4-Preclean® is intended for use solely on glossy surfaces and is not a stain remover.

Treat the target surface under normal environmental conditions, limiting its use to surfaces at room temperature (between 10º C and 40º C).

Spritz Nano4-Carprotect® onto 30x30 cm areas of the surface. Gently rub the liquid with a cloth (use sparingly).

The curing process for Nano4-Carprotect® requires a minimum of 60 minutes under normal conditions, possibly extending up to a full day in case of higher air humidity.